Take These 8 Steps to Prevent Slips & Falls in Cold, Wet Conditions

In addition to cold stress, such as hypothermia, many people are seriously injured each year due to slips and falls in cold, wet conditions. Now is the time to start thinking about preventative measures to keep your team members safe this winter season.

Let’s review where slips and falls usually occur and some actionable preventative steps you and your team can take.

Where Do Slips and Falls Usually Occur?

Common locations for falls include driveways and sidewalks, stairs, ramps, and doorways, which are where most pedestrian traffic is experienced – it’s also due to the difference in temperatures between the solid surfaces and wet elements, which can create an icing effect.

Preventative Tips

During cold, wet conditions, best practices to prevent slips and falls in the workplace include:

1 – Assess the walking areas to identify potential hazards such as the build-up of snow/ice and, once identified, take corrective measures to eliminate or mitigate the risks. Be sure to wear the appropriate shoes and place the snow/ice where it will not create an additional risk.

2 – When necessary, perform de-icing efforts in all outdoor walking areas, and consistent efforts should be maintained to remove ice and water from indoor walking areas.

3 – Try to avoid slippery surfaces when walking, such as those covered in ice and those that don’t have non-slip surfaces. Take an alternate route!

4 – Remind your employees to focus on the travel path – refrain from reading, texting, etc.

5 – Wear the appropriate footwear – wear shoes with slip-resistant soles or over-shoes with good treads.

6 – Use handrails wherever they are available such as while using stairs and ramps.

7 – At the entrance, consider installing a mounted shoe scraper or a mat with a scraper surface, each of which can assist in removing excess snow and ice.

8 – Once inside, clean your shoes again or wear different shoes.

If you begin to experience a slip and fall, do not try to fight the fall as this can increase the risk of injury – the result of twisting or bending can be more severe than the fall itself.

If you start to slip and fall forward, you should try to roll with the fall. If you begin to fall backward, you should try to sit down.

Keep our tips in mind this winter and remind your employees often about slip and fall prevention. For additional information on preventing slips and falls, watch our on-demand webinar.

Mike Pettit
Mike Pettit
Mike joined ICW Group in February 2016 and provides risk management services throughout North Florida and South Georgia. He assists clients across a spectrum of industries, including construction, agriculture, manufacturing, warehousing and distribution, transportation, property management, and medical and health service providers. Mike is also a certified OSHA trainer for construction and general industry. Mike earned his Bachelor's degree from Florida State University. In 1996, he started his career in safety and health, and continues assisting business owners in providing safe work environments and promoting safety. He is also a member of ICW Group's Industrial Hygiene and Machinery & Industrial Technology teams.

Related Articles

What You Need To Know About Fall Protection

Fall protection (general requirements) continues to be the #1 cited OSHA violation, with fall protection (training) coming in at #7. Basically, falls are a big deal at a work...

Strategies to Reduce Stress and Promote Workplace Safety

In today’s fast-paced work environment, the relationship between a troubled employee and workplace safety is more intertwined than ever. As organizations continue to push for greater efficiency and productivity,...

OSHA’s Top Ten Safety Violations for 2024

As OSHA unveils the 2024 list of its 10 most frequently cited safety violations, there are once again no surprises at the top. For the 14th consecutive year, Fall Protection...